Penguard E20
Product Description
This is a two component amine cured epoxy coating. It is a zinc phosphate pigmented product. Can be used as an anti corrosive primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel and galvanised steel substrates. Specially designed for new construction where short dry to handle and over coating times are required. Suitable for Flow Coating Application Method.
Product data
Film thickness per coat
Drying and curing time
Product data
| Property | Test/Standard | Description |
|---|---|---|
| Solids by volume | ISO 3233 | 62 ± 2 % |
| Gloss level (GU 60 °) | ISO 2813 | matt (0-35) |
Film thickness per coat
- Typical recommended specification range
| STANDARD GRADE | |
|---|---|
| Dry film thickness | 50 – 175 μm |
| Wet film thickness | 80 – 285 μm |
| Theoretical spreading rate | 12.4 – 3.5 m²/l |
Drying and curing time
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Surface (touch) dry | 2.5 h | 1.5 h | 1 h |
| Walk-on-dry | 9 h | 3.5 h | 2.5 h |
