Penguard Pro Alu
Product Description
This is a two component amine cured epoxy coating. It is a surface tolerant, high solids, high build product. It is an aluminium pigmented product. Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates.
Product data
Film thickness per coat
Drying and curing time
Product data
| Property | Test/Standard | Description |
|---|---|---|
| Solids by volume | ISO 3233 | 75 ± 2 % |
| Gloss level (GU 60 °) | ISO 2813 | semi gloss (35-70) |
Film thickness per coat
- Typical recommended specification range
| STANDARD GRADE | |
|---|---|
| Dry film thickness | 100 – 500 μm |
| Wet film thickness | 133 – 667 μm |
| Theoretical spreading rate | 7.5 – 1.5 m²/l |
Drying and curing time
| Substrate temperature | 0 °C | 5 °C | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Surface (touch) dry | 18 h | 8 h | 6 h | 5 h | 3 h | 1 h |
| Walk-on-dry | 32 h | 18 h | 12 h | 10 h | 6 h | 4 h |
