Penguard Primer
Product Description
This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a primer for new construction. Can be used as primer as a part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
Product data
Film thickness per coat
Drying and curing time
Product data
| Property | Test/Standard | Description |
|---|---|---|
| Solids by volume | ISO 3233 | 51 ± 2 % |
| Gloss level (GU 60 °) | ISO 2813 | matt (0-35) |
Film thickness per coat
- Typical recommended specification range
| STANDARD GRADE | |
|---|---|
| Dry film thickness | 40 – 60 μm |
| Wet film thickness | 80 – 120 μm |
| Theoretical spreading rate | 12.8 – 8.5 m²/l |
Drying and curing time
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Surface (touch) dry | 2 h | 1 h | 30 min |
| Walk-on-dry | 14 h | 6.5 h | 3 h |
