Penguard Express MIO
Product Description
This is a two component amine cured epoxy coating. It is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where short dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates. It can be applied at sub zero surface temperatures.
Product data
Film thickness per coat
Drying and curing time
Product data
| Property | Test/Standard | Description |
|---|---|---|
| Solids by volume | ISO 3233 | 74 ± 2 % |
| Gloss level (GU 60 °) | ISO 2813 | matt (0-35) |
Film thickness per coat
- Typical recommended specification range
| STANDARD GRADE | |
|---|---|
| Dry film thickness | 75 – 250 μm |
| Wet film thickness | 100 – 340 μm |
| Theoretical spreading rate | 9.9 – 3 m²/l |
Drying and curing time
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Surface (touch) dry | 16 h | 11 °C | 4 °C | 2 °C | 1 h | 30 min |
| Walk-on-dry | 38 h | 24 °C | 10 °C | 6 °C | 3 h | 2 h |
